YES
We show the termination of the TRS R:

  check(|0|()) -> zero()
  check(s(|0|())) -> odd()
  check(s(s(|0|()))) -> even()
  check(s(s(s(x)))) -> check(s(x))
  half(|0|()) -> |0|()
  half(s(|0|())) -> |0|()
  half(s(s(x))) -> s(half(x))
  plus(|0|(),y) -> y
  plus(s(x),y) -> s(plus(x,y))
  times(x,y) -> timesIter(x,y,|0|())
  timesIter(x,y,z) -> if(check(x),x,y,z,plus(z,y))
  p(s(x)) -> x
  p(|0|()) -> |0|()
  if(zero(),x,y,z,u) -> z
  if(odd(),x,y,z,u) -> timesIter(p(x),y,u)
  if(even(),x,y,z,u) -> plus(timesIter(half(x),y,half(z)),timesIter(half(x),y,half(s(z))))


-- SCC decomposition.

Consider the dependency pair problem (P, R), where P consists of

p1: check#(s(s(s(x)))) -> check#(s(x))
p2: half#(s(s(x))) -> half#(x)
p3: plus#(s(x),y) -> plus#(x,y)
p4: times#(x,y) -> timesIter#(x,y,|0|())
p5: timesIter#(x,y,z) -> if#(check(x),x,y,z,plus(z,y))
p6: timesIter#(x,y,z) -> check#(x)
p7: timesIter#(x,y,z) -> plus#(z,y)
p8: if#(odd(),x,y,z,u) -> timesIter#(p(x),y,u)
p9: if#(odd(),x,y,z,u) -> p#(x)
p10: if#(even(),x,y,z,u) -> plus#(timesIter(half(x),y,half(z)),timesIter(half(x),y,half(s(z))))
p11: if#(even(),x,y,z,u) -> timesIter#(half(x),y,half(z))
p12: if#(even(),x,y,z,u) -> half#(x)
p13: if#(even(),x,y,z,u) -> half#(z)
p14: if#(even(),x,y,z,u) -> timesIter#(half(x),y,half(s(z)))
p15: if#(even(),x,y,z,u) -> half#(s(z))

and R consists of:

r1: check(|0|()) -> zero()
r2: check(s(|0|())) -> odd()
r3: check(s(s(|0|()))) -> even()
r4: check(s(s(s(x)))) -> check(s(x))
r5: half(|0|()) -> |0|()
r6: half(s(|0|())) -> |0|()
r7: half(s(s(x))) -> s(half(x))
r8: plus(|0|(),y) -> y
r9: plus(s(x),y) -> s(plus(x,y))
r10: times(x,y) -> timesIter(x,y,|0|())
r11: timesIter(x,y,z) -> if(check(x),x,y,z,plus(z,y))
r12: p(s(x)) -> x
r13: p(|0|()) -> |0|()
r14: if(zero(),x,y,z,u) -> z
r15: if(odd(),x,y,z,u) -> timesIter(p(x),y,u)
r16: if(even(),x,y,z,u) -> plus(timesIter(half(x),y,half(z)),timesIter(half(x),y,half(s(z))))

The estimated dependency graph contains the following SCCs:

  {p5, p8, p11, p14}
  {p1}
  {p2}
  {p3}


-- Reduction pair.

Consider the dependency pair problem (P, R), where P consists of

p1: if#(even(),x,y,z,u) -> timesIter#(half(x),y,half(s(z)))
p2: timesIter#(x,y,z) -> if#(check(x),x,y,z,plus(z,y))
p3: if#(even(),x,y,z,u) -> timesIter#(half(x),y,half(z))
p4: if#(odd(),x,y,z,u) -> timesIter#(p(x),y,u)

and R consists of:

r1: check(|0|()) -> zero()
r2: check(s(|0|())) -> odd()
r3: check(s(s(|0|()))) -> even()
r4: check(s(s(s(x)))) -> check(s(x))
r5: half(|0|()) -> |0|()
r6: half(s(|0|())) -> |0|()
r7: half(s(s(x))) -> s(half(x))
r8: plus(|0|(),y) -> y
r9: plus(s(x),y) -> s(plus(x,y))
r10: times(x,y) -> timesIter(x,y,|0|())
r11: timesIter(x,y,z) -> if(check(x),x,y,z,plus(z,y))
r12: p(s(x)) -> x
r13: p(|0|()) -> |0|()
r14: if(zero(),x,y,z,u) -> z
r15: if(odd(),x,y,z,u) -> timesIter(p(x),y,u)
r16: if(even(),x,y,z,u) -> plus(timesIter(half(x),y,half(z)),timesIter(half(x),y,half(s(z))))

The set of usable rules consists of

  r1, r2, r3, r4, r5, r6, r7, r12, r13

Take the reduction pair:

  generalized weighted path order (>=MG, >G)
  
    base order 1:
  
      max/plus interpretation on natural numbers:
      
        if#_A(x1,x2,x3,x4,x5) = max{x1 - 8, x2 + 11}
        even_A = 39
        timesIter#_A(x1,x2,x3) = x1 + 12
        half_A(x1) = max{6, x1 - 27}
        s_A(x1) = x1 + 36
        check_A(x1) = max{7, x1 - 2}
        plus_A(x1,x2) = x1 + 37
        odd_A = 29
        p_A(x1) = max{8, x1 - 2}
        |0|_A = 4
        zero_A = 3
  
    base order 2:
  
      marked-algebra reduction triple (>=A, >=A!, >A!):
      
        matrix interpretation with standard point-wise order:
        
          carrier: N^1
          order: standard order
          interpretations:
            if#_A(x1,x2,x3,x4,x5) = 0
            even_A() = 17
            timesIter#_A(x1,x2,x3) = 0
            half_A(x1) = x1
            s_A(x1) = x1 + 6
            check_A(x1) = x1 + 1
            plus_A(x1,x2) = 1
            odd_A() = 19
            p_A(x1) = x1 + 18
            |0|_A() = 14
            zero_A() = 15
            if#!_A(x1,x2,x3,x4,x5) = x1
            even!_A() = 3
            timesIter#!_A(x1,x2,x3) = x1 + 2
            half!_A(x1) = x1 + 4
            s!_A(x1) = 16
            check!_A(x1) = 1
            plus!_A(x1,x2) = x1 + 15
            odd!_A() = 13
            p!_A(x1) = 18
            |0|!_A() = 17
            zero!_A() = 1
  
    partial status:
  
      pi(if#) = []
      pi(even) = []
      pi(timesIter#) = []
      pi(half) = []
      pi(s) = []
      pi(check) = []
      pi(plus) = [1]
      pi(odd) = []
      pi(p) = []
      pi(|0|) = []
      pi(zero) = []

The following rules are removed:

  p1, p2, p3, p4

Then no dependency pair remains.

-- Reduction pair.

Consider the dependency pair problem (P, R), where P consists of

p1: check#(s(s(s(x)))) -> check#(s(x))

and R consists of:

r1: check(|0|()) -> zero()
r2: check(s(|0|())) -> odd()
r3: check(s(s(|0|()))) -> even()
r4: check(s(s(s(x)))) -> check(s(x))
r5: half(|0|()) -> |0|()
r6: half(s(|0|())) -> |0|()
r7: half(s(s(x))) -> s(half(x))
r8: plus(|0|(),y) -> y
r9: plus(s(x),y) -> s(plus(x,y))
r10: times(x,y) -> timesIter(x,y,|0|())
r11: timesIter(x,y,z) -> if(check(x),x,y,z,plus(z,y))
r12: p(s(x)) -> x
r13: p(|0|()) -> |0|()
r14: if(zero(),x,y,z,u) -> z
r15: if(odd(),x,y,z,u) -> timesIter(p(x),y,u)
r16: if(even(),x,y,z,u) -> plus(timesIter(half(x),y,half(z)),timesIter(half(x),y,half(s(z))))

The set of usable rules consists of

  r5, r6, r7

Take the reduction pair:

  generalized weighted path order (>=MG, >G)
  
    base order 1:
  
      max/plus interpretation on natural numbers:
      
        check#_A(x1) = max{5, x1 - 1}
        s_A(x1) = x1 + 7
        half_A(x1) = x1 + 3
        |0|_A = 21
  
    base order 2:
  
      marked-algebra reduction triple (>=A, >=A!, >A!):
      
        matrix interpretation with standard point-wise order:
        
          carrier: N^1
          order: standard order
          interpretations:
            check#_A(x1) = x1
            s_A(x1) = 4
            half_A(x1) = 10
            |0|_A() = 2
            check#!_A(x1) = 4
            s!_A(x1) = x1 + 5
            half!_A(x1) = x1 + 10
            |0|!_A() = 2
  
    partial status:
  
      pi(check#) = []
      pi(s) = [1]
      pi(half) = [1]
      pi(|0|) = []

The following rules are removed:

  p1

Then no dependency pair remains.

-- Reduction pair.

Consider the dependency pair problem (P, R), where P consists of

p1: half#(s(s(x))) -> half#(x)

and R consists of:

r1: check(|0|()) -> zero()
r2: check(s(|0|())) -> odd()
r3: check(s(s(|0|()))) -> even()
r4: check(s(s(s(x)))) -> check(s(x))
r5: half(|0|()) -> |0|()
r6: half(s(|0|())) -> |0|()
r7: half(s(s(x))) -> s(half(x))
r8: plus(|0|(),y) -> y
r9: plus(s(x),y) -> s(plus(x,y))
r10: times(x,y) -> timesIter(x,y,|0|())
r11: timesIter(x,y,z) -> if(check(x),x,y,z,plus(z,y))
r12: p(s(x)) -> x
r13: p(|0|()) -> |0|()
r14: if(zero(),x,y,z,u) -> z
r15: if(odd(),x,y,z,u) -> timesIter(p(x),y,u)
r16: if(even(),x,y,z,u) -> plus(timesIter(half(x),y,half(z)),timesIter(half(x),y,half(s(z))))

The set of usable rules consists of

  (no rules)

Take the reduction pair:

  generalized weighted path order (>=MG, >G)
  
    base order 1:
  
      max/plus interpretation on natural numbers:
      
        half#_A(x1) = 1
        s_A(x1) = 23
  
    base order 2:
  
      marked-algebra reduction triple (>=A, >=A!, >A!):
      
        matrix interpretation with standard point-wise order:
        
          carrier: N^1
          order: standard order
          interpretations:
            half#_A(x1) = x1
            s_A(x1) = x1 + 3
            half#!_A(x1) = x1
            s!_A(x1) = x1 + 4
  
    partial status:
  
      pi(half#) = []
      pi(s) = []

The following rules are removed:

  p1

Then no dependency pair remains.

-- Reduction pair.

Consider the dependency pair problem (P, R), where P consists of

p1: plus#(s(x),y) -> plus#(x,y)

and R consists of:

r1: check(|0|()) -> zero()
r2: check(s(|0|())) -> odd()
r3: check(s(s(|0|()))) -> even()
r4: check(s(s(s(x)))) -> check(s(x))
r5: half(|0|()) -> |0|()
r6: half(s(|0|())) -> |0|()
r7: half(s(s(x))) -> s(half(x))
r8: plus(|0|(),y) -> y
r9: plus(s(x),y) -> s(plus(x,y))
r10: times(x,y) -> timesIter(x,y,|0|())
r11: timesIter(x,y,z) -> if(check(x),x,y,z,plus(z,y))
r12: p(s(x)) -> x
r13: p(|0|()) -> |0|()
r14: if(zero(),x,y,z,u) -> z
r15: if(odd(),x,y,z,u) -> timesIter(p(x),y,u)
r16: if(even(),x,y,z,u) -> plus(timesIter(half(x),y,half(z)),timesIter(half(x),y,half(s(z))))

The set of usable rules consists of

  (no rules)

Take the reduction pair:

  generalized weighted path order (>=MG, >G)
  
    base order 1:
  
      max/plus interpretation on natural numbers:
      
        plus#_A(x1,x2) = max{6, x2 + 1}
        s_A(x1) = 5
  
    base order 2:
  
      marked-algebra reduction triple (>=A, >=A!, >A!):
      
        matrix interpretation with standard point-wise order:
        
          carrier: N^1
          order: standard order
          interpretations:
            plus#_A(x1,x2) = x1
            s_A(x1) = x1 + 4
            plus#!_A(x1,x2) = x1 + 4
            s!_A(x1) = x1 + 3
  
    partial status:
  
      pi(plus#) = [2]
      pi(s) = []

The following rules are removed:

  p1

Then no dependency pair remains.